#include <SPI.h>
#include <Ethernet.h>
#include <VirtualWire.h>
// Enter a MAC address and IP address for your controller below. 
// The IP address will be dependent on your local network: 
byte mac[] = { 
0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; 
IPAddress ip(192,168,50,177); 

// Initialize the Ethernet server library 
// with the IP address and port you want to use 
// (port 80 is default for HTTP): 
EthernetServer server(90); 
int Tensione_adc; 
int Corr_casa; 
int Corr_gara; 
int Cons_enel; 
int Cons_inv;
unsigned long Tmemoria;
void setup() { 
// Open serial communications and wait for port to 
while (!Serial) { 
; // wait for serial port to connect. Needed for Leonardo only 
} 

// start the Ethernet connection and the server: 
Ethernet.begin(mac, ip); 
server.begin(); 
Serial.print("server is at "); 
Serial.println(Ethernet.localIP()); 
} 


void loop() 
{ 
  vw_set_rx_pin(9);
 vw_set_ptt_inverted(true);
 vw_setup(2000);
 vw_rx_start();
 // listen for incoming clients  
 EthernetClient client = server.available(); 
 if (client) 
   { 
   Serial.println("new client"); 
   // an http request ends with a blank line 
   boolean currentLineIsBlank = true; 
   while (client.connected()) 
     { 
     if (client.available()) 
       { 
       char c = client.read(); 
       Serial.write(c); 
       // if you've gotten to the end of the line (received a newline 
       // character) and the line is blank, the http request has ended, 
       // so you can send a reply 
       if (c == '\n' && currentLineIsBlank) 
         { 
         // send a standard http response header 
         client.println("GET http://www.energialternativa.info/Public/NewForum/SolarPlatform/DatiImpianto.php?TestDati HTTP/1.0");    
         break; 
         } 
       if (c == '\n') 
         { 
         // you're starting a new line 
         currentLineIsBlank = true; 
         } 
      else if (c != '\r') 
        { 
        // you've gotten a character on the current line 
        currentLineIsBlank = false; 
        }  
      }
     }
  // give the web browser time to receive the data 
  delay(5); 
  // close the connection: 
  client.stop(); 
  Serial.println("client disonnected"); 
  }
}